8 Tips | How to Fix Windows 7 Stuck on Welcome Screen

Updated by Jerry on Dec 19, 2022
  | Computer Instruction

If you are facing Windows 7 stuck on the welcome screen issue, then welcome to this post. Here, every user can find solutions regarding this issue. And we are here to provide 8 solutions to resolve this Windows 7 stuck on the welcome screen. People face this problem due to many reasons. Therefore, you should try every solution that can eliminate this problem. Let's look at solutions to help you if your Windows 7 computer gets stuck on the welcome screen.

8 Ways to Fix Windows 7 Stuck on Welcome Screen

In this section, we're going to cover the detailed steps you need to take if your computer Windows 7 is stuck on the welcome screen. There are many possible causes for this issue, so we'll walk through some of the most common problems to get your system up and running.

  1. Fix 1. Disconnect USB Devices
  2. Fix 2. Disconnect from the Internet
  3. Fix 3. Restart Windows Update Service
  4. Fix 4. Perform Startup Repair
  5. Fix 5. Run System Checks
  6. Fix 6. Clean Boot Troubleshooting
  7. Fix7. Restore Windows
  8. Fix 8. Replace Hard Drive

Fix 1. Disconnect USB Devices

You can face this issue because you may have connected different USB devices with your computer/laptop, like a keyboard, mouse, USB, WiFi adapters, speakers, or wireless Bluetooth speakers. So, first, you should disconnect such types of devices. Then, if you have connected any wireless device like Bluetooth speakers, etc., you need to switch off your Bluetooth so it will be disconnected.

Fix 2. Disconnect from the Internet

This problem may occur due to the internet connection. There are possibilities regarding this, so you need to disconnect the internet connection whether you have connected through a wired internet connection or a WiFi connection.

The detailed steps are as follows:

Step 1. Suppose you connected a wired connection; just disconnect its cable, and remove the Ethernet cord.

Step 2. If your computer is connected to the internet through WiFi, just turn off your WiFi device until that problem is solved.

Fix 3. Restart Windows Update Service

You can fix this issue by restarting the Windows update service. The detailed steps are as follows:

Step 1. Press the "Windows+R" buttons to open the dialogue box, write cmd, and hit the "Enter" button.

Step 2. Write the below commands in the Command Prompt but press the "Enter" button after adding each command.

net stop wuauserv 
cd %systemroot% 
ren SoftwareDistribution SD.old 
net start wuauserv

net start wuauserv

Step 3. Finally, write Exit and hit the "Enter" button to close it. Now, you need to restart your PC/Laptop.

Fix 4. Perform Startup Repair

Try this method to solve the Windows 7 stuck on welcome screen issue.

The detailed steps are as follows:

Step 1. First, you should boot to "System Recovery Options" in this regard and restart your PC using the power button.

Step 2. As your PC restarts, hold the "F8" key from your keyboard before the Windows logo appears.

Step 3. Choose "Repair and System Recovery" from the advanced boot options, choose "Startup Repair", and follow the further process accordingly.

choose startup repair

Fix 5. Run System Checks

Sometimes, the system could be affected by corrupted files, which could be the reason for this issue. So, it'll be better to run system checks to solve this issue. Please follow the detailed steps:

Step 1. To start booting, you need to insert the Windows bootable media drive in your PC/Laptop.

Step 2. Select language and click "Next".

Step 3. Press the "Shift" and "F10" keys from your keyboard to open "Command Prompt".

Step 4. Write the below commands in Command Prompt, but you should press Enter button after typing each command.

sfc /scannow
chkdsk c: /f /r
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

digital citizen

Step 5. Finally, write Exit and hit the "Enter" button to close it and restart your PC/Laptop to check if the problem is solved.

Fix 6. Clean Boot Troubleshooting

Due to the misconfiguration of a driver, this problem can occur, or there may be another reason. But you need to solve it now by performing clean boot troubleshooting. Please follow the detailed steps:

Step 1. Click the Windows "Start" button from the bottom left corner, and type msconfig in the opened search bar or dialogue box.

Step 2. Click "Selective Startup", and here you need to deselect "Load Startup items" under the "Selective Startup" section.

selective startup

Step 3. Go to the "Services" tab, and click "Hide all Microsoft Services" from the bottom left corner. Next, click "Disable All" from the bottom right and click "OK".

choose disable all

Step 4: Click "Restart" when prompted.

Fix 7. Restore Windows

If you've enabled system restore and established a restore point, you can return to the configuration that functioned well. Follow the detailed steps to restore Windows:

Step 1. Head for Control Panel > System Properties > System Protection and click "System Restore".

system restore

Step 2. Click "Next" once the pop-up appears to start the system's restore wizard.

Step 3. From the list, choose a restore point, confirm restoration and click "Finish".

Notice:
You need to check the list of affected programs to understand if you are deleting an essential update or program.

Fix 8. Replace Hard Drive

If the above 7 solutions don't solve your problem, you probably need to replace the HDD. Because if your hard drive has been dead, no other solution works to get rid of that problem. You need to acquire a new hard drive and then completely reinstall all programs like Windows operating system etc.

Bonus Tip After Solving Stuck on Welcome Screen

Congrats if you've solved the problem. If not, now you have a better idea of solving Windows 7 stuck on the welcome screen. As we know, any kind of machine or device doesn't work permanently perfectly. It's obvious that every machine breaks down sometimes, whether it's a computer/laptop or something else. Nothing always works without fault, and fault is an obvious thing. If not today, it could happen in the future. So in this regard, we are seriously concerned about you because we take care of you. We are here with an extra tip and a permanent solution! What's a permanent solution? It's the EaseUS Todo Backup Home. Yes, dear readers! It's a very convenient way to back up all your crucial data so that your valuable data and files remain safe with EaseUS Todo Backup Home if any potential disaster occurs. You can get back all your data whenever you want.

  Free Download

Support Windows 11/10/8/7

You can refer to the following steps to use this nice software.

Step 1. Launch EaseUS Todo Backup on your computer, and click Create Backup on the home screen and then hit the big question mark to select backup contents.

backup outlook mail step1

Step 2. To back up your Windows operating system, click "OS" to begin the backup task.

backup outlook mail step2

Step 3. Your Windows operating system information and all system related files and partitions will be automatically selected so you don't need to do any manual selection at this step. Next, you'll need to choose a location to save the system image backup by clicking the illustrated area.

system backup

Step 4. The backup location can be another local drive on your computer, an external hard drive, network, cloud or NAS. Generally, we recommend you use an external physical drive or cloud to preserve the system backup files. 

backup outlook mail step4

Step 5. Customiztion settings like enabling an automatic backup schedule in daily, weekly, monthly, or upon an event, and making a differential and incremental backup are available in the Options button if you're interested. Click "Backup Now", and the Windows system backup process will begin. The completed backup task will display on the left side in a card style.

backup outlook mail step 5

Why should you use EaseUS Todo Backup to protect your data and make a safe backup?

Because of:

So, why are you still waiting? Download EaseUS Todo Backup Home, enjoy its countless benefits and features, and get rid of worries about any potential disaster.

The Bottom Line

Looking at the big picture, you took a look at the top 8 solutions to solve the issue of your computer getting stuck on the Windows 7 welcome screen. You can start by disconnecting the PC from the Internet or USB devices. You can also use other solutions like, Restart Windows Update Service, Perform Startup Repair, Run System Checks, Clean Boot Troubleshooting, and Restore Windows.

If the above methods don't resolve the issue of Windows 7 stuck on welcome screen, then replacing a hard drive will solve your problem. In the end, don't forget to leave your valuable feedback. Also, you can tell us, if you have any other solutions to resolve Windows 7 stuck on welcome screen issue. We'd love to learn from you.

  Free Download

Support Windows 11/10/8/7

FAQs on Windows 7 Stuck on Welcome Screen

You may also have questions below:

1. Why is my computer stuck on the starting Windows screen?

People face this problem due to many reasons. First, you should know that currently, Windows 7 is almost retired because Microsoft doesn't support it. Instead, they've released other new and updated Windows, and Windows 7 is approximately 13 years old, released in 2009.

Nowadays, this is a common issue in Windows 7. Of course, you are not isolated, but almost every Windows 7 user has experienced the same thing. This may be out of memory on the main drive or due to a virus. Therefore, you should try every above-discussed solutions that can eliminate this problem.

2. Why is my Windows 7 not loading?

Generally, if your Windows 7 is not loading, there could be a problem with the software or hardware. First, we talk about possible faults in the software, like malware or virus attacks, outdated drivers, lost or corrupt system files, etc. Regarding hardware, there may be PSU, motherboard, etc., broken down, and connected UBS devices could also create problems, overheating, etc. If any above faults exist in your computer, you'll experience that issue.

3. How do I start win7 in Safe Mode?

Safe Mode helps you diagnose and sometimes fix issues. If you're facing any problems and want to start Windows 7 in Safe Mode, follow the detailed steps:

Step 1. Restart your PC/Laptop.

Step 2. Press "F8" instantly after turning it on.

Step 3. It'll bring you to the "Advanced Boot Options" here. You've three choices like "Safe Mode", "Safe Mode with Networking", and "Safe Mode with Command Prompt". Now, choose "Safe Mode" using the arrow keys and hit the "Enter" button from your keyboard.

4. What do I do if my computer is stuck on the welcome screen?

If you're facing this issue that your computer is stuck on the welcome screen, you need to try the above-discussed detailed solutions. First, try to disconnect the Internet or USB devices. Then, if that doesn't solve your issue, try alternative solutions like Restart Windows Update Service, Perform Startup Repair, Run System Checks, Clean Boot Troubleshooting, and Restore Windows. Please read the above-detailed steps for each solution.

Was This Page Helpful?

 
 
 

NEW Released

EaseUS
DriverHandy

Get It

EaseUS Data Recovery Services

Request a free evaluation >>

EaseUS data recovery experts have uneaqualed expertise to repair disks/systems and salvage data from all devices like RAID, HDD, SSD, USB, etc.