Apps Crashing After Cloning Boot Drive to SSD (Causes & Fixes)

You're in the right destination if you've recently encountered the issue of an app crashing after cloning boot drive to SSD. This tutorial will outline different fixes to address this problem. We'll start by outlining the common factors that lead to the issue. You'll also learn about an alternative SSD clone tool.

  Free Download

Support Windows 11/10/8/7

100% Secure

Page Table of Contents

Larissa

Updated on Nov 18, 2024

0 Views | 0 min read

Your apps should work normally even after cloning your boot drive to another SSD. Cloning moves everything needed for the apps to run on the new drive. Despite that, it's possible to encounter the app crashing after cloning boot drive to SSD issue.

This tutorial from EaseUS outlines the common reasons for this problem and discusses their solutions. Keep reading to learn more.

User Case: App Crashing After Cloning/Moving Boot Drive to SSD

🙋‍♂️"I recently switched my storage to SSD and moved my boot drive. I've noticed something strange: a few apps keep crashing within one hour of launch. I've tried different fixes, like running CHKDSK or updating BIOS, but the error doesn't disappear. I now feel exhausted and want some help." 

It's uncommon for apps installed on your HDD to misbehave after cloning them to an SSD. There could be an underlying reason if that happens. This section seeks to outline the possible reasons that could lead to this error. Most users reported the following reasons:

  • ❌C drive conflicts between your HDD and the new SSD.
  • ❌Corrupted system files.
  • ❌RAM is not running at optimal speed.
  • ❌Incompatibility issues between your new SSD and the motherboard.
  • ❌Memory errors.

You'll need to fix these issues so all your apps can run normally on SSD. The next section will outline the possible solutions.

❤️Kind Tips: If you want to save time and solve the problem faster, re-cloning your boot drive to SSD is the best option. A reliable disk cloning tool, like EaseUS Disk Copy, is the key to a successful cloning process. It comes with various cloning features and is supported by advanced technology. You can clone a boot drive to a new SSD without any issue, and you can boot from the new disk seamlessly and run all APPs and programs smoothly. We'll show you how to do it in the following part.

How to Fix Apps Crashing After Cloning SSD (Proven Effective)

Most people switch to an SSD to enhance the performance of their device. It could be worrying if apps start crashing after moving to your new drive. This section will explain four effective solutions to the problem.

Solution 1. Boot With Only the SSD

You could be experiencing the "apps crashing" problem because you booted your PC with both drives after cloning. Booting only with the new SSD first is recommended so your system can automatically assign it to the C drive. This will ensure that all the apps run from it. Check these steps:

Step 1. Please shut down your computer after cloning HDD to SSD.

Step 2. Open the back casing and locate your old HDD. Detach it from your computer. Close the casing and turn on your device. 

1-boot-from-ssd

Step 3. Press the keys to enter BIOS and select your SSD as the boot drive. Your device will restart and boot from the SSD. The system will automatically allocate the C drive to your SSD.

2-boot-from-ssd

Step 4. Next, you can reconnect your old HDD. Launch the troublesome apps and check if the crashing issue has disappeared. If not, you can proceed to the next fix.

Solution 2. Configure RAM to Run at Optimal Speed

Some users have noted that applying this fix addresses the "apps crashing" problem. You can overclock your RAM manually or automatically by enabling XMP/EXPO profiles. The latter is a safer approach if you're a non-tech-savvy individual. You can apply it via the following steps:

Step 1. Restart your computer and press the applicable keys to enter BIOS settings.

Step 2. Select the "Tweaker" submenu to find your XMP/EXPO settings.

Step 3. Pick your preferred XMP/EXPO profile to optimize your RAM. You can always switch between different profiles as you wish. Save the changes and exit BIOS.

1-overclock-ram-bios

Step 4. Your PC will restart and implement the new RAM overclock changes. If all goes well, this will fix the "apps crashing" problem. You can proceed to the next fix if the problem persists.

Solution 3. Update BIOS

You may encounter the "apps crashing" issue because of compatibility issues between your new SSD and the motherboard. You can conveniently address this issue by updating your BIOS. This entails downloading the latest BIOS update from your product's official website. Check these steps:

Step 1. Access "System Information" on your computer to check the current BIOS version.

1-ssd-update-bios

Step 2. Head to your device manufacturer's website and input information about your computer model. Next, click on "Driver & Utility."

Step 3. Navigate to "BIOS & FIRMWARE." Check for the latest BIOS update and click the "Download" button.

2-ssd-update-bios

Step 4. When the download completes, extract its contents to a USB flash drive. Next, restart your device and press the relevant keys to access BIOS settings.

Step 5. Under BIOS settings, select "Tools" and click on "Instant Flash" in the "UEFI Update Utility" section. Select the file that you extracted from your USB flash drive. Pick the "Update" option. Your system will start conducting a BIOS update. You can stay patient as the process runs to completion.

Step 6. Once the BIOS update is complete, you can restart your device and check if the "apps crashing" error has disappeared.

Share this blog on your social media to help others fix the "APP crashing after cloning boot drive to SSD" issue successfully.

 

Solution 4. Uninstall and Reinstall the Affected Apps

You can apply this fix to the "apps crashing" problem as the final remedy. Removing the apps and conducting a fresh download could fix the issue. You only need to ensure that you back up any important data. You can then check these steps:

Step 1. Open the "Control Panel."

Step 2. Click on "Programs and Features."

1-control-panel-uninstall

Step 3. Locate the app that keeps crashing among the listed programs and click on it. Next, select the "Uninstall" option at the top. Repeat this step for all the troublesome apps.

2-control-panel-uninstall

Step 4. Restart your device once you've finished uninstalling the apps. Next, you can go to each app's software download page and download it afresh.

Step 5. Run the download file to install the app. You can start using the app and check if the crashing issue has disappeared. This will likely fix the problem most of the time.

Clone SSD with EaseUS Disk Copy Easily Without Any Issue

The issue of apps crashing after cloning your boot drive to SSD may happen because you never used an efficient cloning tool. A good disk cloner should offer secure file transfer from the source disk to the destination. It should allow you to access all your programs and other files without restrictions.

Try EaseUS Disk Copy to reliably clone your boot drive to SSD. Your chances of encountering corrupted files when using this tool are quite minimal. This efficient disk cloner lets you move Windows to another SSD/HDD without reinstalling. This helps to save time.

What if you want to upgrade to a larger HDD/SSD? Disk Copy has got you covered. It offers faster cloning speeds to ensure you move all your files quickly. Its friendly user interface makes the cloning process seamless.

Key Features

  • ✅Clone HDD to SSD without any issues.
  • ✅Migrate Windows 10/11 to another SSD without reinstalling.
  • ✅Restore data from a failing hard drive.
  • ✅Clone a larger drive to a smaller one.
  • ✅Faster cloning speeds.
  • ✅It guarantees the safety of your files before and after cloning.

Do you want to clone your HDD/SSD securely? Download this tool right now to get started. 

  Free Download

Support Windows 11/10/8/7

100% Secure

Step 1: In "Disk Mode", select the HDD that you want to clone.

select the hard drive that you want to clone

Step 2: Select the SSD as your destination.

select the SSD

Step 3: Edit the disk layout and then click "Proceed" to continue.

As the destination is an SSD, you are suggested to tick "Check the option if the target is SSD".

confirm the message

A warning message tells you that the data on the SSD will be erased. Click "OK" to continue if you do not have important data on the destination disk.

check the diak layout

Step 4: Wait for the process to complete.

click proceed to start the cloning process

Share this blog on your social media to help others fix the "APP crashing after cloning boot drive to SSD" issue successfully.

 

Final Words

You may encounter the app crashing after cloning boot drive to SSD issue for different reasons. The problem could result from corrupted system files or conflicts between your HDD and the new SSD. Incompatibility issues could also lead to this problem. This tutorial has outlined how to address this problem in detail.

To avoid a similar issue in the future, ensure you clone your SSD using EaseUS Disk Copy. This tool minimizes the chances of errors after disk cloning. It guarantees the safety of your files before and after the cloning process. The tool offers faster cloning speeds to save time. Download it now to get started.

  Free Download

Support Windows 11/10/8/7

100% Secure

FAQs About APP Crashing After Cloning Boot Drive to SSD

1. What To Do After Cloning SSD to SSD?

  • Confirm that all the files have been cloned successfully to your second SSD.
  • Set your computer to boot from the cloned SSD (under your BIOS settings).
  • Adjust your Windows Startup settings to ensure your operating system runs from the cloned SSD.
  • Verify that all your programs are running correctly on the new SSD.
  • You can create new partitions on the cloned SSD if you wish.

2. Should You Defrag Before Cloning to SSD?

The answer is NO. Solid-state drives do not have any moving components like HDDs; hence, there's no need to defragment them before cloning. They store data efficiently, ensuring the disk's optimal performance without defragmentation. The only thing you need to do with SSDs before cloning is to ensure you initialize them. 

3. Does Cloning an SSD Make It Bootable?

No, this isn't usually the case. A cloning process only copies data from one drive to another, including the operating system. You can only make a cloned SSD bootable by setting it as the primary boot drive in your BIOS settings. You can then save the changes and exit the window for your device to reboot. You can now boot from the cloned drive and access your Windows operating system.

EaseUS Disk Copy

EaseUS Disk Copy is a well designed and very easy-to-use HDD/SSD cloning and migration tool, a tool which should be ideal for anyone wanting to quickly and easily migrate an existing system disk to a new disk (or newly installed SSD drive) with the minimal of configuration required.

  Free Download

Support Windows 11/10/8/7

100% Secure

  • Updated by

    Larissa

    Larissa has rich experience in writing technical articles and is now a professional editor at EaseUS. She is good at writing articles about data recovery, disk cloning, disk partitioning, data backup, and other related knowledge. Her detailed and ultimate guides help users find effective solutions to their problems. She is fond of traveling, reading, and riding in her spare time.…
    Read full bio

EaseUS Disk Copy

Dedicated cloning tool to meet all your system, disk, and partition clone needs.

Try It Now

Support Windows 11/10/8/7