How to Fix It Looks Like Windows Didn't Load Correctly

Quick Access to Fix It Looks Like Windows Didn't Load Correctly

To fix this error - it looks like windows didn't load correctly, you can choose to restore your PC to an earlier point, only accepting the fact that some downloaded files and applications, plus personal files you saved in the system partition will be missing. The easiest way to fix the error is to watch the video and fix Windows didn't load correctly in three ways. 

1. 1 - Fix MBR and System File
2. 2 - Fix BCD Error
3. 3 - Uninstall Software or Driver in Safe Mode

If you prefer a step-by-step guide, you can read the fixes below to get more help.

It Looks Like Windows Didn't Load Correctly

"Automatic Repair 

Windows couldn't load correctly 

System Restore can try to restore your PC to an earlier point in time when it worked correctly. This repair will not change personal data, but it might remove some apps that were installed recently. You cannot undo this process. 

Restore | Cancel"

This is a Windows Automatic Repair topic called Windows couldn't load correctly, or perhaps you received the variants, such as Windows couldn't start correctly, your PC did not start correctly, or Windows couldn't restart correctly. Each specific error has detailed supplementary information, telling you what you should do next. Before you are going to fix this error, you must learn about the causes.

What Causes Your PC Did Not Start Correctly

Windows didn't load correctly error is often caused by these reasons:

1 - BCD is missing or corrupt

BCD became missing or corrupt. This could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

2 - File system integrity compromised

The file system itself may become corrupt or damaged. 

3 - System files are damaged

The system files may also become damaged.

After you have learned about the reasons, you can fix Windows couldn't load correctly error accordingly. To solve your problem, I have gathered 5 effective solutions to fix Windows couldn't load correctly in Windows 10/8.1/8/7.

1. Fix 1. Restore Data to Another Drive
2. Fix 2. Boot into Safe Mode
3. Fix 3. Run CHKDSK
4. Fix 4. Rebuild BCD
5. Fix 5. Perform System Restore

Fix 1. Restore Data to Another Drive to Avoid Data Loss

Before you are going to fix Windows couldn't load correctly error, you must export or restore your data to avoid additional trouble. Since your PC cannot load and boot, you need to create a bootable disk to enter your PC. You can run EaseUS Data Recovery Wizard WinPE Edition. With it, you can restore data to another drive even you can't boot into Windows. Besides, this data recovery software has many highlights:

• Recover data from dead hard drive
• Restore data from corrupted Windows 10/8/7
• Retrieve photos, videos, documents, and emails

Step 1. Run EaseUS Data Recovery Wizard. Choose the drive where you lost files and start scanning by clicking "Search for Lost Data". This software allows you to recover lost data from all devices, including HDD, SSD, USB drive, SD card, pen drive, camera, etc.

Step 2. Browse the full scan results. You can choose the file type you need by clicking on the file type filter. EaseUS data recovery software supports 1000+ file types like photos, videos, documents, emails, audio files, and many more. 

Step 3. Select the files you want to preview. Click "Recover" and set a storage location or Cloud drive to save the recovered data. 

Fix 2. Boot into Safe Mode to Fix Windows Not Loading Correctly

Safe Mode is a diagnostic mode of Windows. It is the safest and most promising option when it comes to troubleshooting your pc. Since you cannot boot into Windows when you are faced with Windows didn't load correctly error, you need a Windows installation CD/DVD for the following methods. If you don't have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:

Step 1. Connect the Windows Installation Media to the computer.

Step 2. Choose to boot from the installation media from the screen.

Step 3. Wait for the files to be loaded.

Step 4. In the Windows Setup window, choose "Next".

Step 5. Again, in the Windows Setup window, choose "Repair your computer" > "Troubleshoot" > "Advanced options" > "Startup Settings".

Step 6. Choose a Safe Mode option (Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt) to enter.

You can uninstall suspicious software or drivers in Safe Mode.

Fix 3. Run CHKDSK to Fix Windows 10 Didn't Load Correctly

Since you can boot correctly, you need to create a Windows 10/8/7 installation disk. Then, follow the steps below:

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click "Repair your computer" or hit F8 at the install now screen.

Step 3. Click "Troubleshoot" > "Advanced options" > "Command Prompt".

Step 4. Type chkdsk E: /f /r /x, and press "enter".

"E" means the drive letter of the partition you want to repair.

Fix 4. Rebuild BCD If Windows Couldn't Load Correctly

If BCD became missing or corrupt, Windows 10/8/7 cannot load correctly. Thus, you can rebuild BCD to fix the error. You also need a Windows installation disc.

Step 1. Insert Windows 10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click "Repair your computer" or hit F8 at the install now screen.

Step 3. Click "Troubleshoot" > "Advanced options" > "Command Prompt".

Step 4. Type each command line and hit Enter each time:

ren BCD BCD.old

bcdboot C:\Windows /1 en-us /s G: /f ALL (Note: c:\ is the drive where Windows 10/8.1/8 is installed on.)

Step 5. Type exit in Command Prompt when the process completes and then restart your PC.

Fix 5. Perform System Restore If Windows Still Cannot Load

If you have created a Windows restore point before the Windows not loading error occurs, you can perform a system restore to deal with the issue.

Step 1. Choose "Advanced options" on the blue screen and then navigate to "Troubleshoot" > "Advanced Options" > "System Restore". 

Step 2. Choose a restore point to restore your computer to the state.

Step 3. Wait until the restore process finishes and then restart your computer.

If you don't have a system image, you can install Windows 10/8/7 from USB by yourself.

Conclusion

How to fix if it looks like Windows didn't load correctly error? If you are wondering then you are in the right place. Here you will find out how to fix this issue with five useful solutions. If you have extra tips, you can contact us and share your solutions.

Windows Couldn't Load Correctly FAQs

If you still have problems, read on to these related questions. You can get additional help about Windows boot problems.

How do I fix it looks like windows didn't load correctly?

You can fix Windows 10 didn't load correctly with these solutions:

• Restore Data to Another Drive
• Boot into Safe Mode
• Run CHKDSK
• Rebuild BCD
• Perform System Restore

What causes your PC did not start correctly?

As mentioned above, the Windows did not start correctly issue can be caused by a third-party program or a recent hardware change on your system, a BCD error, or a file system error.

Why Windows 10 is not working properly?

In some cases, third-party anti-virus and anti-malware software can disrupt certain Windows programs. 

How do I fix Windows startup problems?

You can fix it by uninstalling new software or drivers:

• Insert the Windows bootable drive and boot from it.
• Select your language preferences, and click Next.
• Click Repair your computer.
• Select Troubleshoot > Startup Settings > Restart.
• Press the F4 key to boot Windows into Safe Mode.
• Then, you can uninstall new software or drivers.