Your SD card may become RAW due to file system errors. Fortunately, there are ways to fix a RAW SD card. You can run CHKDSK to have a try first. If it doesn't work, there is a certain way to repair the RAW SD card without losing data: use EaseUS Data Recovery Wizard to retrieve your files from the RAW drive and then format the SD card.
To fully repair a RAW SD card without losing data, follow the three quick steps:
Step 1. Execute chkdsk H: /f /r to repair RAW SD card without formatting.
Step 2. Run EaseUS SD card recovery software to recover data from RAW SD card.
Step 3. Format RAW SD card to the NTFS or FAT32 file system.
When an SD card or another storage device becomes RAW, Windows will prevent you from opening the device and ask you to format the SD card, prompting you with the error "You need to format the disk in the drive before you can use it" or something similar every time when you are trying to access the files inside. That's because the RAW file system is not a file system that can be recognized by the computer. Generally, the file system of your SD card turns to RAW due to the following reasons:
The issues listed could be caused by a virus attack, misoperations on the storage medium, format failure, and more. Although not being able to open and access your RAW SD card is quite annoying, fixing a RAW drive is quite easy actually.
If you want to repair a RAW SD card without formatting, you can run the CHKDSK command to have a try. If CHKDSK fails to work, you can use the proven way to fix your SD card in RAW format with ease.
Since a RAW SD card indicates file system errors, it's understandable to format the SD card to fix it. Formatting will assign a new file system to your SD card and thus make it usable again. However, formatting will erase all the existing files on the SD card. That's why you need to perform RAW SD card recovery first.
You cannot access the files on a RAW device. But EaseUS Data Recovery Wizard can. It will help you effectively recover data from RAW SD card, USB flash drive, external hard drive, disk partition, and more in simple steps. After performing RAW SD card data recovery, you can format the RAW SD card to repair it without worrying about losing data.
To recover data from RAW SD card:
Step 1. Connect the SD card, memory card, or CF Card to your computer and launch EaseUS memory card recovery software on your PC. The SD card will be listed under the Devices section. Choose the SD card and click "Scan" to start looking for your lost data.
Step 2. The software will start a scan automatically. The scan is powerful enough to find all lost files that even lost file names. After the scanning process, you can find deleted items from the tree-view panel on the left. Then, click "Filter" if you are looking for a specific file type, like photos, documents, videos or emails.
Step 3. You can directly double-click the files to preview the content. After this, you can choose wanted files and click "Recover" to restore them to a secure location on your PC or other external storage devices.
If the data recovery software fails to restore RAW files, you still have a good chance of retrieving the data by using EaseUS RAW data recovery services.
Consult with EaseUS data recovery experts for one-on-one manual recovery service. We could offer the following services after FREE diagnosis:
To format the SD card:
Step 1. Insert your SD card into your computer via a card reader.
Step 2. Open "This PC". Right-click your SD card and choose "Format".
Step 3. In the new window, set a file system and click "Start".
Step 4. In the Warning window, click "OK" to start formatting your SD card.
CHKDSK is helpful for repairing a RAW drive only when the $MFT (Master File Table) on the device is intact. If it's corrupted, you will get the error message "The type of the file system is RAW. CHKDSK is not available for RAW drives."
Caution: The CHKDSK command will permanently erase all data on your disk. So make sure that you recover all data from the RAW SD card first with EaseUS Data Recovery Wizard.
Step 1. Click "Start" and type cmd.
Step 2. Right-click "Command Prompt" and choose "Run as administrator".
Step 3. Enter the following command: chkdsk H: /f /r
Replace "H" with the drive letter of your RAW SD card.
If you are lucky, CMD will help you fix the RAW SD card successfully while keeping all your data after finishing all the steps.
If you get the error message mentioned above, don't worry. You can fix the RAW SD card without losing files following the method above. When it has finished, you can copy the files you recovered back to your SD card and use them as before.
SD cards and other storage devices like USBs, external hard drives, or local hard drives are likely to become RAW. The methods provided can also be applied to these devices, too. In most cases, running the CHKDSK command won't help you fix a RAW device. Therefore, the most straightforward way to repair a RAW storage medium is to perform RAW data recovery and then format the device directly.
You have learned about effective ways to repair RAW SD cards. If you still have other problems, read on to get additional help.
1. What does it mean if my SD card is RAW?
If your SD card is marked as RAW. It means that its file system is damaged. Your SD card becomes unreadable by any operating system.
2. How do I format a RAW SD card?
You can format a RAW SD card with these steps:
3. Can the damaged SD card be repaired?
Yes, you can turn to EaseUS data recovery service to ask experts for help. Before the process, you can try to run CHKDSK to see if it works.
4. Why do SD cards get corrupted?
Here are common causes of SD card corruption:
Related Articles
Repair a Corrupted Pen Drive/SD Card for Free
How to Fix WD Easystore Not Working on Windows
Fixed: Drive Is Not Accessible on Windows 11/10 [4 Methods]
[Full Guide] 10TB/12TB Internal and External Hard Drives