Apacer USB 3.0 Repair and Format Tool Free Download (Official)

This page offers a direct download link for Apacer USB 3.0 repair tool and a manual guide, for how to use the Format and Restore function to repair a not working Apacer USB flash drive. To protect data from erasing during the troubleshooting course, you must back up the data. If cannot access or open the USB flash drive at that moment, use EaseUS Data Recovery Wizard for help.

If you're having trouble with your Apacer USB drive, you can use the Apacer USB 3.0 repair tool to get things working once more. This has powerful tools, such as disk formatting & factory resetting, plus it's compatible with AH1xx, AH3xx, and AH5xx models.

We show you how to download the Apacer USB 3.0 repair tool and the steps required to get your flash drive up and running again.

How to Download and Install Apacer USB 3.0 Repair Tool

Download USB 3.0 Repair tool 3.21.0.0

Above is a direct download link for the Apacer USB 3.0 repair tool. To install on your system, click the link, then double-click the Restore_v3.23.exe file. It's compatible with Windows 10 and will also support the new Windows 11.

Once you've launched the app, you'll be presented with two options: Format and Restore.

Before you begin, be sure that you read the descriptions of what each function does. As you can see from the screenshot below, formatting the drive or restoring it to factory settings will result in all data on the drive being lost. So, once again, be sure to back up your files.

How to Repair Apacer USB Flash Drives Manually

If the corruption is severe and the Apacer repair software fails to repair USB flash drive, you can ask for help from EaseUS's technical support team. They provide 1 on 1 data recovery services to fix USB/HDD/SSD issues, recover partitions, wipe data, etc.

How to Back up Apacer USB Flash Drive

If you're still able to open files on the affected USB drive, just copy and paste the files to another storage space. This will protect your data even if the USB drive stops working. Should you be experiencing error messages such as "you need to format the disk", RAW drive, "flash drive not formatted", or find that the drive has bad sectors, file system corruption, or is now a ‘RAW drive’, then there’s a good chance you won’t be able to access the files. In this instance, use EaseUS EaseUS Data Recovery Wizard as it should enable you to save the data on the drive.

Guide: Recover Data from an Inaccessible or Corrupted Apacer USB Flash Drive:

Step 1. Choose the USB drive to scan

Launch EaseUS Data Recovery Wizard and choose your USB drive where you lost important files. Click "Scan" to start.

Step 2. Check and preview USB drive data

When the scanning is finished, you can quickly locate a specific type of file by using the Filter feature as well as the Search option.

Step 3. Restore flash drive data

After checking and finding lost USB drive files, click "Recover" to restore them. You shall save the found files to a safe location on your PC rather than to your USB drive.

Fix an Apacer USB Flash Drive with Apacer USB 3.0 Repair Tool

Note: While the Apacer 3.0 Repair Tool is very good, the repair may fail if the drive has a severe hardware malfunction. In that case, you'll need to contact the relevant customer support for help.

Guide: Format and Restore Apacer USB Flash Drive

Step 1. Connect your Apacer USB flash drive to the computer and run the repair tool. 

Step 2. To wipe the drive and start as new, select "Format". Next, choose the drive, then the file system you want to use (NTFS, FAT16, etc.). To begin, click Format, then wait for the process to complete.

Step 3. For a low-level format (one that returns the drive to its default factory settings), select the "Restore" option. Confirm your choice, then wait for the process to complete.

Regedit.exe is a free Apacer write-protected format utility that can help. 

Step 1. Press Windows + R to open Run, then type Regedit to open the Registry editor. 

Step 2. In the Registry Editor, Navigate to the following key: 
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Step 3. Double-click on the WriteProtect value in the right-hand pane of Regedit.exe. Change the Value data from 1 to 0 and click OK to save the change. 

Step 4. After completing all the steps above, reconnect your Apacer USB drive and you should find that the write protection has been removed. Now you'll be able to format the drive.

After finishing all the steps, re-connect your Apacer USB flash drive, and you will find that the write protection has been removed and the device is available for formatting. 

Apacer USB 3.0 Repair FAQs

What if you still have problems? read the questions and answers below to get additional help for Apacer USB 3.0 repair.

1. What causes a USB to malfunction?

Here are the reasons:

• The currently loaded USB driver has become unstable or corrupt
• Your PC requires an update for issues that may conflict with a USB external hard drive and Windows
• Windows may be missing other important updates hardware or software issues

2. How do I fix my USB 3.0 port not working?

Follow the steps to fix the USB port not working:

• Adjust Power Management
• Uninstall Universal Bus Controllers
• Disable USB Selective Suspend

3. How do I corrupt a USB?

You can corrupt a USB on purpose:

• Connect your flash drive to a computer
• Press Windows + X keys and run Windows Command Prompt as admin
• Enter the command lines:

1. diskpart
2. list disk
3. select disk 1
4. clean

4. What is the lifespan of a USB stick?

About 10 years. Usually, many manufacturers provide an estimated lifespan for their devices (typically 10 years).