Free | How to Recover Files from Formatted USB/Pen Drive

Accidental formatting of USB flash drives happens now and then. To recover data that you worry might be lost, you have three main options to choose from: data recovery software, backups or Command Line tools. We cover all three in this guide, but to save you time, the best method for safely recovering your files is the free EaseUS Data Recovery Software.

To recover data from a formatted pen drive, you need to stop using it immediately to avoid further data loss, then try a data recovery tool like EaseUS Data Recovery Wizard. Just connect your pen drive to your device, run the scan, locate the lost files, or restore the whole drive.

Sometimes you may accidentally format your USB drive, or find yourself in a situation where you can't use the device otherwise. These include:

• 💾System corruption
• 🗂️Raw file system
• ❓USB drive, pen drive, or hard disk not formatted error
• ⚠️The volume does not contain a recognized file system issue or some other errors

Formatting a USB drive usually results in losing most of the data stored on it. Or at least, that's how it seems. In reality, so long as you don't start using the drive and writing files to it, the data can still be there. Read the following instructions to know how to recover data from formatted pen drive:

Method 1. Recover Data from Formatted USB Drive with EaseUS Data Recovery Software

EaseUS Data Recovery Wizard should be your first port of call, as not only is it an easy-to-use solution for recovering data, but it's also free, so there's no financial risk involved.

Other than USB flash drives, it also allows you to recover files from a formatted computer hard drive, external hard drives, SD cards, memory sticks, and other PC-compatible storage devices. Here are the reasons why we recommend this tool:

• Recovers data from formatted USB drives in three simple steps.
• Recovers data from deleted, hidden, lost or RAW partition.
• Supports users previewing the recoverable files.
• Provides two scan modes: quick scan and deep scan.

Download EaseUS Data Recovery Wizard for free. Then, see how easy it is to use by watching the video tutorial or reading the detailed steps provided below:

Step 1. Connect the USB drive to your computer. Launch EaseUS Data Recovery Wizard. Select the formatted SD card, USB flash drive, or Pen drive from which you what to restore lost files and then click "Search for Lost Data".

Step 2. After the scan completed, all scan results will be displayed on the screen. Use the "Filter" or "File Type" feature to find your target files. If you remember the file name, you can also search in the search box, which is the fastest way to find the target file.

Step 3. Choose the files you want to recover from your formatted external drive and click "Recover". A new window will appear, you need to choose a local storage or Cloud drive to store the files. Then, click "OK" to confirm.

As you can see, EaseUS file recovery software allows you to restore all lost data due to formatting. The only thing you need to do to recover a formatted USB is to choose the location of the lost data and the files you want to recover. It is also popular among users who need to recover files after emptying the recycle bin, retrieve lost data after a system crash, and more. Since data loss due to various reasons occurs daily. It's wise for you to equip your computer with it to maximize your chance of recovering all the lost files.

Share this post with users who are facing the same USB data loss error:

Method 2. Recover Data from Formatted USB Drive with Data Recovery Service

As you can see, EaseUS file recovery software is a pain-free way to retrieve files you thought lost after reformatting your drive. That's not the only scenario it can help with though, as it's also proved popular among users who needed to recover files after emptying the recycle bin, retrieve lost data after a system crash, and more.

Method 3. Retrieve Data from Formatted USB Using CMD

Some tips will tell you that you can use the CMD to recover formatted USB, actually, the Command Prompt can only help you unhide the hidden files. If your USB data is permanently deleted, you can only apply EaseUS Data Recovery Wizard to recover it.

In case some users want to know how to show hidden files with CMD, here we give the detailed steps.

Step 1. Connect your USB flash drive to your computer.

Step 2. Check the drive letter of your USB via This PC.

Step 3. Click the search icon in the taskbar, enter "cmd", then right-click "Command Prompt" and choose "Run as administrator".

Step 4. Enter chkdsk F: /f in Command Prompt. (Replace F: with the drive letter of your formatted USB.)

Step 5. Enter Y and then enter the drive letter of your pen drive.

Step 6. Enter F: \ >attrib –h –r –s /s /d *.* and CMD will show you all hidden files from your pen drive. (F means the drive letter or your USB)

How Can Data Be Recovered from Formatted USB/Pen Drives

One question that is often raised by users is 'How can the data on formatted USB drives be recovered?' In this section, we'll quickly explain why this is possible with tools like EaseUS Data Recovery Wizard.

Generally, after formatting, your deleted files are not completely gone from the drive; it's just that you can't see them. They don't get permanently erased until new data is written, which then replaces the data that the system has marked as no longer required.

Therefore, it is essential that you don't use a USB drive or other storage medium after you've accidentally reformatted it. By doing so, you will most likely write over the data you thought was lost, making it irretrievable.

Data recovery software knows what to look for when scanning drives, so it's able to find the files that Windows or macOS now thinks are unwanted, then give you the ability to copy them to new destinations.

Conclusion

Although the three methods we've explained in this guide will all restore data thought lost after reformatting a drive, by far the simplest to use is EaseUS Data Recovery Wizard. Due to being a dedicated, professional software tool, it makes finding and retrieving files quick and easy, plus it also offers additional features that cover other data loss situations.

Compared to using command-line code or backup files, EaseUS Data Recovery Wizard provides more flexibility in choosing the files you'd like to recover and can help in a variety of data loss situations. Don't hesitate to give it a try.

Recover Formatted USB Drive FAQs

It is the last part of this passage. If you have some extra questions about recovering a formatted USB drive, keep reading.

1. Does formatting a USB delete everything?

Does formatting USB delete everything? The answer is yes. When you are asked to format a USB drive, your USB drive may be corrupted or damaged already. You can perform a quick format, and the bad sectors won’t be checked. And you can perform a full format to format the whole USB drive, and it will take longer time than a quick format.

If you want to recover all the files from the USB drive, EaseUS Data Recovery Wizard can help.

2. Can data on a USB drive be recovered after formatting?

Yes, the files stored on your USB drive are not erased forever, and they still remain on the USB drive. With the help of handy data recovery software, the data can be recovered easily. How to recover lost data from a USB drive?

1. 1. Download EaseUS Data Recovery Wizard and launch it on your PC.
2. 2. Scan the USB drive to find deleted files.
3. 3. Restore the files on the USB drive after previewing them.

3. What is the best USB recovery software?

We select nine reliable USB recovery software for you:

1. 1. EaseUS Dara Recovery Wizard
2. 2. Stellar Data Recovery
3. 3. Recuva
4. 4. Disk Drill Data Recovery
5. 5. SysTools Pen Drive Recovery
6. 6. Aiseesoft Data Recovery
7. 7. Data Rescue 6
8. 8. DMDE
9. 9. R-Studio

4. How to format my USB drive correctly?

You can follow the steps below to format a USB drive correctly:

1. 1. Connect the USB drive to your PC and run CMD.
2. 2. Type in disk part, list disk, select disk x, list, volume, select volume x, format fs=ntfs quick, and exit one by one.
3. 3. Or you can download a USB drive format tool to perform a format.