Free Download PXE Boot Server to Boot Multiple Computers on Network

Free download EaseUS PXE Boot Server, the best PXE Boot tool to boot multiple computers on Network or install Windows 10/8/7/Server 2012......via PXE boot.

All about PXE Boot Server tool 

What is PXE and PXE Boot tool

In computing, The PXE (short for Preboot Execution Environment) describes a standardized client-server environment that boots a software assembly, retrieved from a network, on PXE-enabled clients.

A PXE Boot tool is usually a network boot software which is designed for solving the problem that boots many computers from an image file on network. 

What a PXE Boot Server tool can do for you

1. Maintain or install system for multiple computers without inserting CD or USB into these computers one by one. 
2. Deal with the sitaution where your computer cannot start normally already and it can't boot through loading image file on inner hard drive. 
3. Boot up multiple client computers within LAN when the clients have no available CD-ROM drive and USB ports or you have no CD or USB image at hand. 

Download the best PXE Boot Tool - EaseUS Todo Backup PXE Server 

EaseUS Todo Backup PXE Server is the best PXE Boot tool. Allowing network booting of EaseUS Todo Backup Recovery Environment on target machines, it is especially useful for bare metal recovery or network deployment. Now you can download the program and try it to install Windows 10/8/7/Server 2012......via PXE boot.

How to use EaseUS PXE Boot Server to boot up multiple computers on the network

1. To install EaseUS Todo Backup PXE server, click "Enable PXE" in Tools. EaseUS Todo Backup will configure the boot image directory automatically.

2. Boot your target computer through a network interface.

e.g. To enable network boot (on ASUS motherboard with UEFI boot):

• Restart your computer, press "Del" or "F2" to enter the UEFI, then select "Advanced Mode".
• Choose "Advanced" > "Onboard Devices Configuration" and enable "Realtek PXE Option ROM".
• Go back and enable "Network Stack Configuration".
• Switch to Boot section and enable "Network Stack Driver Support".
• Save the changes and reboot the computer, then press "F8" and select "Realtek Boot Agent".

3. Then it will automatically locate the EaseUS Todo Backup PXE server, which allows network booting of EaseUS Todo Backup Recovery Environment on target machines. You can perform file backup and recovery, disk/partition backup, bare-metal recovery, etc on your target computer.

Note: Make sure there is a working DHCP(Dynamic Host Control Protocol) in your network so that the booting computers can automatically get IP addresses and boot into EaseUS Todo Backup Recovery Environment.

FAQ on PXE Boot Server

1. What is PXE and PXE Boot tool?

A PXE Boot tool is usually a network boot software which is designed for solving the problem that boots many computers from an image file on network. 

2. How do I setup a PXE server?

There are a few things you'll need to do in order to setup a PXE server. First, you need to have a DHCP server configured and running. Next, you'll need to have a TFTP server up and running. Finally, you'll need to configure your PXE server to point to the appropriate boot files.