Pending operation

About Pending operations

Use View Pending operations to view a description of what changes you have specified on your system, but have not yet come into effect.

To view pending operations:

Click View > Pending operations.

About USB, USB2, and FireWire Support

EaseUS Partition Master supports external USB, USB2, and FireWire hard drives under Windows. Operations that are executed in boot mode are not supported on these devices. You can see if an operation will be performed in boot mode at Pending operations. If an operation displays with the boot mode sign, it will not work on a USB, USB2, or FireWire drive. If any of the queued operations display with the boot mode sign, all of the queued operations will be applied in boot mode.


You may also look at the Pending operations window located in the bottom of the left pane.

Click Apply Changes to apply all pending operations that are listed.

Click Undo Last Change to remove the last operation you added to the list.

Click Discard All Changes to remove all pending operations and start over.

Operations that must be run at boot time are marked with a sign. If any operation requires going into boot mode, it will be run at boot time.