Windows Resource Protection Could Not Perform the Requested Operation | 5 Solutions

If you encounter Windows resource protection could not perform the requested operation error on the PC, you can try the following methods:

What Causes 'Windows Resource Protection Could Not Perform the Requested Operation' Error

Does your system alert you that Windows resource protection could not perform the requested operation? You have come to the right place! Windows OS has developed numerous built-in troubleshooting facilities that inspect the system for potential issues, fix system-based problems, and detect inconsistencies without your input.

A system utility called Windows Resource Protection (WRP) guards essential Windows assets. If you see an alert saying, "Windows Resource Protection could not perform the requested operation," that means there is a problem with your WRP setup. We'll demonstrate how to solve the issue for you in this article.

What causes Windows Resource Protection not to perform the requested operation? The most frequent reasons are as follows:

• An issue with the Windows Registry.
• A damaged or corrupt system file.
• A corrupted user profile.
• An inaccurate file permission configuration.
• Malware on your system.

Now, you must be thinking of the "how to fix Windows resource protection could not perform the requested operation" error. Let's see the top 5 fixes, and you should mark this page by sharing it!

Fix 1. How to Fix Windows Resource Protection Error with CHKDSK Command in CMD

This "CHKDSK" command is one of the leading Windows utilities letting you verify your PC's hard drive for errors. This command resolves corrupt files, poor sectors, and other issues, forcing your PC to perform slowly.

The steps are the following to use this CHKDSK command to resolve this error:

Step 1. Open the search bar by hitting the magnifying glass symbol in the taskbar. You may otherwise hit Windows + S to open the search bar.

Step 2. Enter Command Prompt in the search field. Hit the right-click and opt for "Run as Administrator" to boot Command Prompt on Windows 10.

Step 3. Select "yes" to let the application launch with administrative permissions when prompted by UAC, aka User Account Control.

Step 4. Hit the enter button after typing the following command: chkdsk C:/r.

Step 5. Allow some time to complete the scanning process.

Fix 2. Run SFC in Safe Mode to Fix Windows Resource Protection Could Not Perform the Requested Operation

SFC is a significant utility in Windows, allowing users to scan and restore corruptions in the Windows system files. In case it's a corrupted file, the utility will try to restore the file with a top-notch copy from a Windows installation source or cached location.

System File Checker or SFC is implored via the command prompt, and with the help of this file checker, you can mend the files which got damaged or corrupted. The following steps are to run SFC scannow command in safe mode to fix the "Windows Resource Protection Could Not Perform the Requested Operation" error.

However, here's a video to learn more about the ways to fix this error. The main outline of the video is the following:

• 00:19 Run check disk tool
• 01:34 Run SFC in the safe mode
• 02:06 Modify Security Descriptors of WinSXS

Step 1. From the search bar option, you need to type Command Prompt. Whenever it appears, right-click on it, and opt for "Run as Administrator." If you're using a local account that doesn't have admin permissions, you need to grant admin access first.

Step 2. When prompted by the UAC, hit the "yes" button to commence the administrative permissions.

Step 3. Type the command sfc /scannow, and hit the enter button to execute SFC in safe mode.

Step 4. Wait a few minutes for the SFC to complete the PC inspection. If any discrepancy occurs, the utility will retrieve system files and resolve every error.

Fix 3. Troubleshoot Windows Resource Protection Error with Automatic Repair Tool on Windows

If you're unable to troubleshoot the Windows Resource Protection error, it's time to utilize the Automatic Repair Tool. Windows OS will quickly search for anything that isn't configured as it should be and try resetting to its default status. Using the Automatic Repair Tool won't delete the stored data. These are the steps to follow:

Step 1. Open settings by looking for settings in the Windows search bar.

Step 2. Hit the Update & Security.

Step 3. Opt for Recovery from the left panel.

Step 4. Hit the "Restart now" button in the right panel.

Step 5. Your PC will restart in the Windows Recovery ecosystem.

Step 6. Move to Troubleshooting > Advanced Options and select "Automatic Repair".

The instant repair process will commence right away. Windows will keep searching for flawed files and resolve them automatically. It will show you a warning if it finds out an issue that can't be fixed. After that, you may take the desired steps based on the error.

Don't forget to share this tutorial on your FaceBook or other social media platforms!

Fix 4. Reset This PC to Fix Windows Resource Protection Could Not Perform the Requested Operation

You must have tried every fix! If the issue is unresolved, it's time to reset this PC. But before resetting this PC, you should have a backup of all your data. However, the steps to reset Windows are the following:

Step 1. Open settings.

Step 2. Select Update & Security.

Step 3. Opt for Recovery.

Step 4. Hit the "Get Started" button to reset this PC.

Step 5. Opt for "Remove everything" to reset Windows back to its factory reset state in the subsequent window. If Reset This PC not working on your computer, you need to fix this issue first.

Fix 5. Start Windows Modules Installer Service to Fix Windows Resource Protection Error

Have you disabled the Windows Module Installer on your PC? If yes, the SFC scan might not work! This utility instantly verifies and downloads all the latest Windows updates on your PC. If your PC's Windows Module Installer has been disabled, you may have to switch it back on for the SFC check to work correctly. Follow the steps below:

Step 1. Hit the Windows + R buttons on the keyboard to bring the Run utility window.

Step 2. Type services.msc, and hit the OK button. As a result, the Services window will open, and it might take a moment or two to load completely.

Step 3. You need to right-click on the Windows Modules Installer and select Properties.

Step 4. You need to configure the Startup type to Manual. In case the service isn't operating, hit the Start button. Hit the "Apply" button, and after that, "OK". Returning to the list of services should be the next step.

Step 5. Shut the Services window down, and check in case you run into Windows resource protection that could not perform the requested operation error.

Recover Data After Fixing Windows Resource Protection Error

When trying to fix Windows Resource Protection Error, your PC may lose data anytime. So, how to retrieve data? EaseUS is one of the most recognized brands in the data recovery software industry, and EaseUS Data Recovery Wizard has been operating since 2005.

You'd assume that it's still a top option for recovering files after all this time. Undoubtedly, EaseUS Data Recovery Wizard has a wide array of features, which are the following:

Several file retrieval options

You may recover deleted files from hard disk drives, SD cards, SSDs, USB drives, and flash drives.

Super-fast scanning throughout partitions and devices

An array of partitions and connections will be displayed when you activate the software. You might discover a retrieval partition alongside real devices, for instance. If you can't detect a partition, you may locate it by re-scanning the device. Freshly connected or added devices can be detected by hitting the refresh button.

Robust and versatile photo recovery software

It supports USB recovery and also can check SD cards, music players, external discs, ZIP drives, RAID configurations, and even NAS discs (which open in a new tab). This tool has more outstanding capabilities than the majority of other file repair programs.

Download this professional tool now!

Step 1. Run EaseUS Data Recovery Wizard on your computer. Choose the drive where you lost files and click "Scan". If your lost files were on an external storage device, connect it to your computer firstly.

Step 2. The software will quickly scan the deleted files immediately, and then automatically perform a deep scan to find more lost files. After the scan is completed, you can use "Filter" to quickly filter specific file types.

Step 3. Click the "Preview" button or double-click on a file for a full preview. Finally, select the desired files, click "Recover" and choose another safe location to save all the files at once.

Conclusion

If you're having this problem, don't worry! It can be fixed in several ways. Try employing the DISM tool or the System File Analyzer utility first. You might have to reset Windows if none of the above solutions work.

If you lost your data while fixing this Windows resource protection error, download EaseUS Data Recovery Wizard today!

Windows Resource Protection Error FAQs

Consider the below-mentioned FAQs to understand the topic better:

1. How to fix a request that can't be performed because of an I/O device error?

You may update or reinstall the device driver to fix a request which can't be performed due to an I/O device error. The steps are the following:

1. 1. Link the I/O device error-prone unit to the PC, then choose "Manage" from the context menu by right-clicking "This PC".
2. 2. Choose "Disc drives" under "Device Manager".
3. 3. Click "Update Driver" when right-clicking the malfunctioning device.
4. 4. Select "Search periodically for driver software online".

2. Why does it say Windows Resource Protection could not start the repair service?

Windows Resource Protection was unable to launch. When the operating system cannot perform the System File Checker (SFC) Check, the Repair Service is triggered. This issue could have a number of origins, but the Windows Module Installation service malfunctioning is the most likely culprit.

3. How do I reinstall Windows Resource Protection?

You may reinstall Windows Resource Protection with the help of the following methods:

1. 1. Verify and repair problematic drive errors.
2. 2. Run the DISM command to troubleshoot the corrupted files.
3. 3. Activate safe mode by running sfc /scannow.
4. 4. Run SFC from WinRE.
5. 5. Conduct a Windows repair install.

4. Will I lose data when encountering a Windows Resource Protection error?

You can recover lost data when encountering a Windows Resource Protection error. If you don't have a data backup, the chances are that you will never get those data back. So, download EaseUS Data Recovery Wizard today to retrieve all the data which you have lost!