Table of Contents
- Video Recovery
- SD Card Recovery
- Recycle Bin Recovery
- Recover Data from USB
- Recover Deleted Emails
- Hard Drive Not Showing Up in Windows
- Recover Unsaved Word Documents
- Recover Deleted Files
- Recover Files from Virus Infected Hard Drive
- Best Free Photo Recovery Software
- Recover Files from Formatted Hard Drive
When you are faced with Windows 10 errors, how can you identify and isolate the source of problems in your operating system? The answer is Windows 10 clean boot. This article provides a video and step-by-step guide to performing a clean boot in Windows 10. This process also applies to Windows 11.
What Is Clean Boot in Windows 11/10/8/7
Windows 10 clean boot is a troubleshooting tip used to diagnose and resolve problems on Windows 11/10/8/7. Whenever you perform a clean boot, you start your PC/laptop with a minimal set of drivers, services, and startup programs. Moreover, only the essential programs and services required for the system to function are loaded during the process. This means you can identify Windows 10 automatic repair loops, performance issues, etc.
With the help of Windows 10 clean boot, you can determine if the problem is caused by a third-party program or service running in the background. Besides, you can solve Windows errors preventing it from starting up properly.
What you should keep in mind is that a clean boot is not a permanent troubleshooting option for any issues that may exist on your computer. It is a helpful solution to help you diagnose and resolve problems.
Clean Boot VS Safe Mode| What's the Difference
What is Safe Mode in Windows 10? It is another diagnostic mode that helps to fix problems like driver conflicts, software errors, and malware infections. When you boot into Safe Mode in Windows 10, default settings and fundamental device drivers aren't the causes if the issues don't happen in this mode. The main differences between clean boot and safe mode are:
- Clean boot disables all non-essential programs and services, while safe mode only loads essential drivers and services.
- The clean boot can be performed manually using the System Configuration tool, while safe mode can be accessed through the Advanced Startup Options menu.
- Clean boot is used to diagnose and isolate the source of problems in the operating system, while safe mode is used to diagnose and fix problems that may occur during regular Windows 10 startup.
If you can't install Windows 10 or run a program on your computer, you can perform a clean boot to figure out the conflict service and solve this problem. Follow the steps below to learn how to clean boot Windows 10.
Step 1. Click the Search icon, type msconfig, and hit Open.
Step 2. Switch to the Services section.
Step 3. Click the "Hide all Microsoft services" checkbox and press the "Disable all" button.
Step 4. Switch to the Startup section and click "Open Task Manager".
Step 5. Click any startup program you suspect might be interfering and press "Disable". (You can repeat this step.)
Step 6. Close Task Manager and the System Configuration window.
Step 7. Restart Windows 10, and your laptop or PC will only boot with the essentials.
Windows 10 clean boot can do you a great favor if you can't run a program or if Windows 10 installation has failed. If these issues still exist, watch this video to get additional help.
- 0:00 Introduction
- 0:44 Run msconfig command
- 1:51 Disable startup programs
If you have solved your Windows 10 problems, how to start your Windows 10 normally? To exit from clean boot mode and return to normal startup in Windows 10, you need to reverse the steps performed to perform the clean boot. Follow these steps to quit Windows clean boot.
Step 1. Open Search, input msconfig, and hit Enter.
Step 2. Switch to the "Services", click "Hide all Microsoft services", and select " Enable all".
Step 3. Click "Startup > Open Task Manager", click a startup program, and choose "Enable".
Step 4. Repeat the above step to enable all startup programs.
Then, restart your computer, and your laptop and PC should function normally.
How to Recover Data in Windows 10 After a Clean Boot
Does a clean boot erase everything? No, a clean boot does not erase any files or data on your computer. But it temporarily disables some third-party programs and services. Thus, you may lose data when you accidentally shut down some applications. You need to recover deleted files in Windows 10.
Data recovery software is the best way to restore lost files after a clean boot. EaseUS Data Recovery Wizard is an outstanding file recovery software. It has helped millions of users to recover deleted files in Windows 11/10/8/7.
- It can recover lost game data, videos, music, and documents with simple clicks.
- This software supports file recovery from a hard drive, SSD, USB flash drive, and pen drive.
- EaseUS Data Recovery Wizard is compatible with Windows 11/10/8/7 and Mac.
Download this data recovery software and recover lost data in Windows 10.
Note: To guarantee a high data recovery chance, install EaseUS data recovery software on another disk instead of the original disk where you lost files.
Step 1. Launch EaseUS Data Recovery Wizard on your Windows 11, Windows 10, Windows 8, or Windows 7 computer. Select the disk partition or storage location where you lost data and click "Scan".
Step 2. This recovery software will start scanning the disk to find all lost and deleted files. When the scan process completes, click "Filter" > "Type" to specify lost file types.
Step 3. Preview and restore lost Windows files. You can double-click to preview the scanned files. Then, select the target data and click the "Recover" button to save them to another safe spot in the PC or an external storage device.
That's all about Windows 10 clean boot. All you need to do is follow the steps above and diagnose Windows errors. Don't worry even if you lose data in Windows 10. EaseUS free data recovery software can restore pictures, videos, log files, documents, and more with simple clicks. If you find this post helpful, share it on your Twitter, Facebook, or Instagram to help more people.
Windows 10 Clean Boot FAQs
Read the questions and answers below for more help on Windows 10 clean boot.
1. What's the difference between clean boot and Safe Mode?
A clean boot is a troubleshooting technique that helps you identify and isolate the source of problems in your operating system, while safe mode is a diagnostic mode of Windows 10 that starts your computer with a limited set of drivers and services to diagnose and fix problems that may occur during normal startup.
2. Why do you need to perform a clean boot?
Here's the reason why you perform a clean boot:
- Diagnosing startup issues
- Troubleshooting software conflicts
- Resolving performance issues
- Removing malware
3. Is a clean boot good for gaming?
Yes, actually, it will not affect your game, as it will just disable third-party startup services.
4. What happens when you perform a clean boot?
A clean boot starts Windows with a minimal set of drivers and startup programs so that you can determine whether a background program is interfering with your game or program.
Was This Page Helpful?
Brithny is a technology enthusiast, aiming to make readers' tech lives easy and enjoyable. She loves exploring new technologies and writing technical how-to tips. In her spare time, she loves sharing things about her favorite singer - Taylor Swift on her Facebook or Twitter.
EaseUS Data Recovery Wizard is a powerful system recovery software, designed to enable you to recover files you’ve deleted accidentally, potentially lost to malware or an entire hard drive partition. Read More
EaseUS Data Recovery Wizard is the best we have seen. It's far from perfect, partly because today's advanced disk technology makes data-recovery more difficult than it was with the simpler technology of the past. Read More
EaseUS Data Recovery Wizard Pro has a reputation as one of the best data recovery software programs on the market. It comes with a selection of advanced features, including partition recovery, formatted drive restoration, and corrupted file repair. Read More