How to Create EaseUS WinPE Bootable Disk in Windows 10/8/7

What is WinPE Bootable Disk

WinPE (also known as Windows Preinstallation Environment and Windows PE) is a miniature version of Windows, which can be used for deploying PCs, workstations, and servers or troubleshooting an operating system. While EaseUS Partition Master WinPE bootable disk is based on the Windows PE environment, created by EaseUS Partition Master. You can manage hard disk partitions when Operating System crashes, resize the primary drive to reinstall other operating systems, or even manage partitions on a computer without an operating system.

How to Create EaseUS WinPE Bootable Disk (Two Steps)

To create a WinPE Emergency disk, you need to download the EaseUS partition manager software. This software works well under Windows, like extending system partition or solving low disk space and managing disk space, recovering deleted partition, rebuilding MBR, GPT partition recovery, and so on. Besides, you are allowed to resize the primary drive to reinstall other operating systems or even manage partitions on a computer. (RAID can also be perfectly supported.)

Follow the steps below to create an EaseUS Partition Master WinPE bootable disk:

Step 1. To create a bootable disk of EaseUS Partition Master, you should prepare a storage media, like a USB drive, flash drive or a CD/DVD disc. Then, correctly connect the drive to your computer.

Step 2. Launch EaseUS Partition Master, find the "WinPE Creator" feature on the top. Click on it.

Step 3. You can choose the USB or CD/DVD when the drive is available. However, if you do not have a storage device at hand, you can also save the ISO file to a local drive, and later burn it to a storage media. Once made the option, click the "Proceed" button to begin.

When the process finishes, you have successfully created an EaseUS Partition Master WinPE bootable disk. Now, you can manage your hard disks and partitions through the bootable drive whenever the computer fails to boot normally.

If you have RAID drives, load the RAID driver first by clicking Add Driver from the menu bar, which can help you add the driver of your device under WinPE environment, as some specific device cannot be recognized under WinPE environment without drivers installed, such as RAID or some specific hard disk.

Apart from the advantages mentioned above, it is the cheapest one compared with other companies' partition manager software. Such a cost-effective and all-around partition manager software, why not buy it now?

How to Use EaseUS WinPE Bootable Disk

After you have created the EaseUS WinPE bootable disk, you can use the disk to run EaseUS Partition Master even your computer cannot boot. Here are the steps:

Step 1. Connect EaseUS emergency bootable USB disk to a dead, unbootable, or problematic Windows PC.

Step 2. Press the power button to boot the computer, hold F2/F11/Del to enter BIOS.

Step 3. Go to the Boot Drive section and set EaseUS Emergency Bootable USB as the boot drive.

Step 4. Save the changes and exit BIOS.

Step 5. Wait for your computer to boot up from the EaseUS WinPE disk.

Now, you are on the EaseUS Partition Master WinPE interface, and you can use its available features like partition resize, disk partition clone, partition recovery without booting into Windows.

Conclusion

It is very easy to create a WinPE disk with the EaseUS disk management tool. If you want to fix Windows boot errors, you must download EaseUS partition software as soon as possible.